Basic Info.
Structure
Water Ring Pump
Exhauster Method
Positive Displacement Pump
Vacuum Degree
High Vacuum
Ultimate Pressure
80hpa 60torr
Inlet&Outlet Dimensions
100mm
Transport Package
Neutral Wooden Case
Specification
CE Mark, Spare Parts Of High Level
Product Description
DESCRIPTION
2SK Series Two-Stage Liquid Ring Vacuum Pumps can work well like two sets of SK series water ring vacuum pump. Due to SK series vacuum pumps only reach the maximum vacuum of-700mmHg, to meet the high vacuum and the large pumping speed under high vacuum, China developed the 2SK series water ring vacuum pump in 80s in the 20th century.
ADVANTAGE
1. Compared with SK water vacuum pump ,It gets high vacuum and pumping speed etc..
2. Simple structure and easy maintenance.
3. The mostly working medium is water and low maintenance costs.
4.The pump is widely use in many areas and suction water vapor,flammable, explosive and various gases contain a small amount of dust and liquid.
5. The pump can works in the harsh condition
FEATURES
1. Series SK,2SK Water Ring Vacuum Pumps can be used to exhaust ordinary gases as well as condensable gases(such as water vapor). Because they have the features of isothermal compression, they can exhaust flammable and explosive gases. When the pump made up of anti-corrosion material is selected, it can be used for exhausting corrosive gases too.
2. Series 2YK Liquid Ring Vacuum Pumps have the features of higher vacuum and better applicability. The different types of gases can be pumped with the selected suitable working media. Therefore, they can be applied in wider range.
3. The pumps run smoothly with low noise and consumption. The energy-saving is 30 percent comparing with the Water Jet and the Water Vapor Jet Pumps.
PARAMETER
Model |
Displacement
(m3/min) |
Ultimate Pressure |
Motor Power
(kW) |
Rotating Speed
(rpm) |
Water Supply
(L/min) |
Inlet&Outlet
Dimensions
(mm) |
Weight
(kg) |
hPa |
Torr |
SK-0.5B |
0.5 |
47 |
35 |
1.5 |
2900 |
8 |
25 |
45 |
SK-0.8 |
0.8 |
47 |
35 |
2.2 |
2900 |
10 |
40 |
60 |
SK-1.5 |
1.5 |
47 |
35 |
4 |
2900 |
15 |
40 |
75 |
SK-3 |
3 |
80 |
60 |
5.5 |
1450 |
25 |
50 |
153 |
SK-6 |
6 |
80 |
60 |
11 |
1450 |
35 |
50 |
210 |
SK-12 |
12 |
80 |
60 |
22 |
980 |
70 |
100 |
600 |
SK-12B |
12 |
80 |
60 |
18.5 |
980 |
60 |
100 |
450 |
SK-25 |
25 |
80 |
60 |
45 |
980 |
70 |
100 |
900 |
SK-30 |
30 |
80 |
60 |
55 |
980 |
75 |
100 |
1200 |
SK-42 |
42 |
80 |
60 |
75 |
740 |
100 |
100 |
1500 |
2SK-2B |
2 |
40 |
30 |
5.5 |
1450 |
20 |
50 |
185 |
2YK-2B |
2 |
6.6 |
5 |
5.5 |
1450 |
20 |
50 |
185 |
2SK-3 |
3 |
40 |
30 |
7.5 |
1450 |
25 |
50 |
320 |
2YK-3 |
3 |
6.6 |
5 |
7.5 |
1450 |
25 |
50 |
320 |
2SK-6B |
6 |
33 |
30 |
11 |
1450 |
35 |
50 |
370 |
2YK-6B |
6 |
6.6 |
5 |
11 |
1450 |
35 |
50 |
370 |
2SK-12 |
12 |
33 |
25 |
22 |
980 |
70 |
80 |
850 |
2YK-12 |
12 |
6.6 |
5 |
22 |
980 |
70 |
80 |
850 |
2SK-25 |
25 |
33 |
25 |
55,45 |
980 |
60-110 |
100 |
926 |
2YK-25 |
25 |
6.6 |
5 |
55,45 |
980 |
60-110 |
100 |
926 |
APPLICATIONS
It can be applied to the vacuum drying, vacuum degassing, vacuum concentration, vacuum evaporation, vacuum impregnation process in chemical, pharmaceutical, metallurgy, food, medicine, textile, papermaking, electrical industry ( electronic industrial field) and so on. It can compose a vacuum system together with Roots Vacuum Pump and atmospheric Jet pump to achieve high vacuum, high efficiency, low power consumption.
Regular Selection for Water/Liquid Ring Vacuum Pump
1,Based on the vacuum value
(1)If the pump is operated for long time with the inlet pressure range between1.3×104~1×105Pa (between 100 and 760 Torr), please choose series SK Water Ring Vacuum Pump.
(2)If the pump is operated for long time with the inlet pressure range between5×103~1.3×104Pa(between40 and 100 Torr), please choose series 2SK Water Ring Vacuum Pump.
(3)If the pump is operated for long time with the inlet pressure range between1×103~1.3×104Pa(between8 and 100 Torr), please choose series 2YK Liquid Ring Vacuum Pump.
2,Working Media
There are four principles to choose working media(i.e.ring liquids);
(1) Lower saturated steam pressure
(2) Lower viscosity
(3) Stable physical & chemical features; no chemical reaction with the pumped gas;no corrosion to the pump; no pollution to the environment.
(4) Economy
If the water is selected as the working medium, the best temperature of supply water should be lower than or equal to 15 °C; the highest one should not be higher than 40°C. While the transformer oil or other low viscosity and saturated vapor pressure industrial oils are as the working media, the general supply temperature should not higher than 40°C and the working media temperature inside the pump chamber should not be higher than 60C, when the liquid with lower boiling point is selected as the working media under some special circumstances, the cooling unit must be equipped to cool down the working media in order to ensure that the max temperature is 30ºC-50ºC, lower than the boiling point. For the closed circulated system of working media, the liquid storage unit and cooler must be equipped, and the gas-liquid separator must be installed at outlet. The mechanical seal should be used for dynamic seal of the shaft.
3,Choose the dynamic seal of the shaft:
Choose the packing seal in general occasion; choose the mechanical seal when the pump is used in no leak occasion.
4,Choose the material of the part that the gas passed:
(1) For the non anti-corrosion pump, the shaft is made of 45#steel or 40Cr, other parts are made of cast Iron or brass;
(2) For the anti-corrosion pump,the parts that the gas passed, should be made of stainless steel 304 and 306, or other material suitable for the respectively corrosive gas, or the parts should be put with anti-corrosion coating.
5, The motor should be selected based on pumping pressure.
If the pump is used for vacuuming while transferring gas, the pressure of pump outlet exceeds the standard atmosphere pressure.
When the outlet pressure exceeds 0.15MPa, the special double-stages liquid ring compressor should be chosen and not the vacuum pump refitted. Tthe power of the equipped motor should be increased obviously. And the special gas-liquid separator and auto-drain unit should be equipped too.
When the outlet pressure is below 0.15MPa, it can use the vacuum pump refitted as compressor. The power of the equipped motor should be increased properly.
6,Composition methods of the water ring vacuum pump system
The opening circulation system should be used if the working liquid in the outlet need not be circulated or partially circulated.
The closed circulation system should be used if the working liquid in the outlet must be circulated.
Sea Port: Ningbo/Shanghai, China
Standard: CE Mark, Spare Parts Of High Level
Delivery: Normally according to our factory production schedule, but we can follow your first order time
Warranty: If pump appear quality problems, free replacements of spare parts will be offered within one year
WE CAN PROVIDE YOU
1. On-time Delivery, with More Choice
2. Perfect Technical Support
3. Customized Vacuum Solutions and Service
4. Samples Available
5. Long Quality Guarantee
6. Fast Response to Customers' Feedback in 12 hours
DEVELOPMENT VACUUM EQUIPMENT CO., LTD
ADD:DONGGANG INDZONE, TAIZHOU, ZHEJIANG, CHINA PC: 317106
TEL:+86-576-83598308 FAX:+86-576-83598309
Address:
Donggang Inddustrial Zone, Silin, Sanmen, Taizhou, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Electrical & Electronics, Health & Medicine, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Packaging & Printing, Textile
Management System Certification:
ISO 9001
Company Introduction:
DVE pumps are widely used in electronics, electrical, metallurgy, coating, ceramics, pharmaceuticals, chemical, papermaking industry, vacuum heat treatment, vacuum drying and impregnation for transformer, freeze-drying, energy industry, aerospace, or other fields.
As a plant, we specialized in design and manufacture vacuum pumps, vacuum systems for more than 20 years, with professional R& AMP; D team, Sino-US technical cooperation, we obtain CE certificate and manage our production strictly under ISO9001: 2008 Quality Management system. Lots of customers cooperated with us for more than 10 years, for example:
ALD Industries and Montagepark
Staaken GmbH
Starren Strasse 53-63
13581 Berlin, Germany
Dekker Vacuum Technologies, Inc
935 S. Woodland Ave. Michigan City, IN 46360,
United States
Sea Port: Ningbo/Shanghai, China
Standard: CE Mark, Spare Parts Of High Level
Delivery: Normally according to our factory production schedule, but we can follow your first order time
Warranty: If pump appear quality problems, free replacements of spare parts will be offered within one year
WE CAN PROVIDE YOU
1. On-time Delivery, with More Choice
2. Perfect Technical Support
3. Customized Vacuum Solutions and Service
4. Samples Available
5. Long Quality Guarantee
6. Fast Response to Customers′ Feedback in 12 hours
DVE - Where high quality is standard, responsibility lies.
